evening all wiring and fitting out a hotel at the moment most of in far from complete however owner wanted utility room up and working(keep the kettles,toasters etc there!) anyway just before we left today we decided to put up the fluorescent fittings and fit the 2 way switches to give them light at least the utility room has the main come in cupboard in it housing 3 phase dis come in etc anyway after fitting everything and connecting to dis board,on power up i noticed a small hum coming from what i thought was the dis board then when we took the first fittings tube out,the humming cleared,but fitting two started flashing as if trying to ignite again put tube back in- humming approve,no flashing!!tried different phase-same problem fittings wired circle in also emergency fitting change state by to first fitting if that helps i'm suspecting faulty fitting but greatful for any other ideas by the way (i know,i experience should have but)i haven't taken any readings as rest of go not fitted out yet(utility first fittings in circuit). Edited: 11 September 2007 at 11:18 PM by jaylaytee
Thats great where the catch! -------------------------DougieIf everything seems to be going well you have obviously overlooked something.
Are they double fittings?regards -------------------------"We should go metric every advance of the way." ---------------------------------------------Education is the apprenticeship of life!Is it really that bad these days!
When you say you`ve taken no readings does that mean no dead tests either?My first thought is AAF. -------------------------Space - The Final Front Ear
&write; 2007The Institution of Engineering and Technology. The IET is a not-for-profit organisation registered as a charity in the UK
Forex Groups - Tips on Trading
Related article:
http://www.theiet.org/forums/forum/messageview.cfm?catid=205&threadid=19831
comments | Add comment | Report as Spam
|