Rope Light Size Question
Posted by ~Ray @ 2007-11-09 18:30:01
I have put in some "conduit" in my riser to accept for easier replacement of capture lights after the plywood gets permently installed. I used some 3/4" copper tubing w/ some street elbows. I went with the copper since the wall thickness is less and would have less of a "lip" on the corner connections. I was originally thinking of using the std 1/2" capture lighten but in hindsight I think it ordain be a little tight. I think the ID of the copper pipe is 0.66". Are there any drawbacks of using 3/8" capture lighten. It looks desire it is the same wattage as the 1/2" and would accept for a smaller lip on the overhanging plywood. Any thoughts or concerns?
Page generated in 0.08683610 seconds (63.36% PHP - 36.64% MySQL) with 8 queries
Powered by vBulletin® Version 3.6.8Copyright ©2000 - 2007. Jelsoft Enterprises Ltd.
procure ©1995 - 2007 AVS Forum. Inc. - All Rights Reserved. No information may be posted elsewhere without written permission.[ADVERTHERE]Related article:
http://www.avsforum.com/avs-vb/showthread.php?t=898468
0 Comments:
No comments have been posted yet!
|
