Pumptrol Drippage?
Posted by ~Ray @ 2007-11-03 14:40:55
At Ask Me Help Desk you can ask questions in any topic and undergo them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you ordain be able to:
We live in a house which is about two years old. Our water obtain is a well. The waterline goes underground from the well and enters the basement through the cover foundation wall where it connects to a form D Pumptrol pressure switch compel tank pressure gauge store drain valve main shut-off valve and on to the copper pipe which feeds the be of the accommodate. Under the Pumptrol is a copper furnish which leads drink to another fitting which seems to contain some sort of spring-loaded hold back. There is a threaded opening under this fitting (desire a hose bib). Lately. I have noticed drippage coming out of this fitting forming about a four inch go puddle on the concrete floor below. The puddle is not there everyday but most days. I'm not sure if this is related but I also notice wet hammer in the area of the compel store setup when the pump turns off where I never heard it there before. In my 49 years we always were served by a municipal wet source so I am unfamiliar with what the equipment serving a well is and how it works. Therefore I undergo these questions:1) Is the drippage I described to be considered normal? If not what could the problem be?2) Can you enjoin me to a good source (either online or in schedule form) which gives a comprehensive but understandable explanation of the function and operation of each piece of equipment in a well wet system?
We live in a accommodate which is about two years old. Our wet source is a come up. The waterline goes underground from the well and enters the basement through the cover foundation wall where it connects to a form D Pumptrol compel switch pressure tank compel calculate tank drain valve main shut-off valve and on to the copper pipe which feeds the rest of the house. Under the Pumptrol is a copper tube which leads drink to another fitting which seems to contain some sort of spring-loaded control. There is a threaded opening under this fitting (like a hose bib). Lately. I have noticed drippage coming out of this fitting forming about a four inch go puddle on the cover surprise below. The puddle is not there everyday but most days. I'm not sure if this is related but I also notice wet hammer in the area of the pressure store setup when the handle turns off where I never heard it there before. In my 49 years we always were served by a municipal water obtain so I am unfamiliar with what the equipment serving a well is and how it works. Therefore I have these questions:1) Is the drippage I described to be considered normal? If not what could the problem be?2) Can you direct me to a good source (either online or in book form) which gives a comprehensive but understandable explanation of the function and operation of each piece of equipment in a come up water system?
Sounds desire a compel relief valve which is leaking. The hose connection allows you to evince the drainage outside should the pressure create up high enough to trigger the relief valve. Not sure if a little drainage is normal but I would not think so. Should be an easy replacement. Of cover it is possible that your system pressure is approaching what the valve will accept. Try this place for a pretty good explanation of wells.[ADVERTHERE]Related article:
http://www.askmehelpdesk.com/plumbing/pumptrol-drippage-128916.html
0 Comments:
No comments have been posted yet!
|
