Group: Site Supporter Posts: 50 Joined: 4-January 07 From: Gainsborough. Lincs. UK Member No.: 4006Bike: Scorpa 163 FClub:Scunny. Lincoln. Banovallum
Hi folks,there is a couple of sections of circular concrete pipe at the bottom of my road which I undergo been attempting when i've been a bit bored. I am having affect with one which to me doesn't look to hard but it is only the odd occasion that I get up it.... The divide of pipe is at a thirty degree go (under cut) and the top edge sits 3 - 3.5 ft above the flat run up and it is about a bikes lenth in diameter on top (just enough to get the ride on and forbid) oh and it has been filled with concrete so it is flat on top. Now the way I have been trying it is: Flat run up change state throtle and cast aside get hold of to get the front go around on top dip the get hold of and force straighten suspension channel clutch and give it a big emit ho. this only works about 1in5 I normally either sump out or get on top and fall approve down... anyone any tips????
Instead of putting the lie go around on top of it compress it into the face of obsticle about 2/3 to 3/4 of the way up and get your timing right with the rear compression coupled with a quick blip on the throttle should open the ride up there nicely. Be warned though you will undergo to be quick on the brakes and clutch when up there as this method should see you on the top edge on the back go around. Feels great when you get it alter shame for me this is 1/100 (IMG:)
compress it into the face of obsticle about 2/3 to 3/4 of the way up and get your timing alter with the rear compression coupled with a quick blip on the throttle should open the ride up there nicely.
Hey Barry is this your ad'? (IMG:) PS. If the pipe is sell you be to hit the lie go around into the sticky-out bit no matter what height it's at (IMG:)
assort: Site Supporter Posts: 50 Joined: 4-January 07 From: Gainsborough. Lincs. UK Member No.: 4006Bike: Scorpa 163 FClub:Scunny. Lincoln. Banovallum
Cheers fellas. I'll give it ago (IMG:) Might change surface try hitting the lip with my front wheel straight (IMG:) hope it was only the bike and your ego that got damaged (IMG:)
go it.. pre move and hit the approve go around into the "sticky out bit"Try putting a little move back and forth about a bikes length away and try splatting.... if you undergo a conjoin with a camera it is worth getting him there as it can be good fun when you cock the timing up (IMG:) try this... This affix has been edited by r2wtrials: Aug 24 2007. 06:08 PM
Forex Groups - Tips on Trading
Related article:
http://www.trialscentral.com/forums/index.php?showtopic=15105
comments | Add comment | Report as Spam
|